Ads Vertis



  Metabo 623689000 Jig Saw Table

Metabo 623689000 Jig Saw Table

Sunday, July 15, 2012

How to Make Decorative Scalloped Molding

How to Make Decorative Scalloped Molding


Other things that you will need are a good table mounted router with a desired profile bit including a rub bearing, a jig saw or band saw, and sandpaper or a spindle sander and a wood rasp.

How to Make Decorative Scalloped Molding

How to Make Decorative Scalloped Molding

How to Make Decorative Scalloped Molding


How to Make Decorative Scalloped Molding



How to Make Decorative Scalloped Molding

Start by drawing the shape of .5 of the piece of molding on the plywood or cardboard. This is to be .5 of the width of the cabinet that you are going to build plus enough past the end to make a miter if needed.

Next select a piece of lumber that is wide enough and long enough to make the molding. This needs to be twice as long as the pattern from step one. Using a Combination square and a pencil draw a line across the center of the board. Set the pattern on the line and trace around the pattern. Turn the pattern over and place it on the otherside if your center line. Now trace the other .5. This approach will help keep the molding symmetrical.

Next cut out the shape using a band saw or jig saw leaving the outside edge to be cut later. Sand the edge smooth and check that the contour doesn't have any unwanted humps.

Select a router bit that has a bearing and is appropriate for the style of furniture that you are building and install it in the table mounted router. Be sure to use a starter pin installed in the base of the router to safely start the cut. Now route the edge that will become the lower profile of the piece. Be sure not to run around the end of the piece.

Using a marking gauge or a pencil and your finger as a gauge, mark the outside of cut on the piece. Cut theoutside line with a band saw or jig saw. Sand the outside edge and make sure that the piece is smooth and does not have any unwanted humps in it.

Warnings:

Always wear safety glasses when using any power tools.

When using a table mounted router without a fence always use a Starter Pin to guide the work piece into the cutter.
Always keep a firm grip on your work piece and make sure your hands are cleat of the cutter.

How to Make Decorative Scalloped Molding

Woodworking Jigs-Why? How To Build?

Woodworking Jigs-Why? How To Build?


Woodworking machines and hand tools need jigs and fixtures to reach their full potential. A table saw can slice up wood adequately but tenon making requires a fixture. Drilling holes in line on the drill press requires a fence. You can free hand Bandsaw circles. If you want two of them the same diaMeter, you'll need a jig.

Woodworking Jigs-Why? How To Build?

Woodworking Jigs-Why? How To Build?

Woodworking Jigs-Why? How To Build?


Woodworking Jigs-Why? How To Build?



Woodworking Jigs-Why? How To Build?

Hand tools are just as dependent on jigs. A corner chisel needs a guide to chisel a mortise square corner. Most cutting tools need help to perform their chosen task. Routers are the worst case situation-they are simply dependent and reliant on support.

You might think that the key to getting control of the router are difficult. Instinctively, you would think a whirling tool enclosed in a metal case is not good for jigs andfixtures, but it is.

Commercial jigs are available, as some experts suggest. Can you make your own? If done properly, they are better than most commercial jigs and cost a whole lot less. You can improve the jig after building your first one. As this progression continues, your work improves. Often, you find more uses for the same jig.

The point is jigs help you become a quality woodworker. Moreover, your skills will increase as you make woodworking jigs!

A good woodworking jig allows quick set-ups, and efficient cuttings. With a superior jig, few mistakes are possible and not much skill is required for good results. Can you ask for more?

Some jigs take time to make. Once completed, you can use them repeatedly. This is an excellentreason to use first rate materials and take time to align the pieces.

Let's discuss a couple of the woodworking jigs that you can make. These jigs are superior to Commercial Jigs.

Mortise Jig

Why bother with a mortise jig? The mortise and tenon is the joint of choice in furniture. The joint resists tension and twist, and work great in compression and shear. In addition, registration of your joint is perfect.

Some people use hand chisels or a drill press with hollow square chisel. For the most precise and repeatable mortises, you should consider a mortise jig. For a perfect fit, you want the fit the tenon to mortise exactly.

The Mortise Jig gives excellent results without giving away anything. The mortise and tenon jointwill last for a lifetime. You can make mortises of nearly any length, width or depth. Moreover, they are repeatable for multiple cuts.

How does the mortise jig work?

The beauty of this system is simplicity.
The set up is quick. The cuttings are efficient. It supports the workpiece in all directions. It locks in the router to remove only the mortise. It is repeatable for several pieces, such as multiple drawers ' cavities on each side of a desk. It makes the joint the uniform and strong.
Tenon Jig

A Tenon Jig is easy to make. It provides precise four-faced tenons of nearly any length and width. It has fewer parts than the Mortise Jig, yet is just as accurate.

With a Tenon Jig, the cuttingresults are excellent, the process Fast, and guaranteed safety. All that you need is a little patience to make a Tenon Jig. Along with the Mortise Jig, you can instantly have a mortise and tenon joint that fits snugly and aligns correctly.

Using these two woodworking jigs, you can craft precise mortise and tenon joints in less time than any other method. You get exact alignMent for both parts. Can you ask for more?

You can build many woodworking jigs. Examples: Baby Crib Spindles Jig, Circle Cutting Jig, Edge Guides, Inlay Jig & Templates, Lapping Jig, Jig, Notching and Router Insert Plate Jig & templates, just to name a few.

You will gain confidence with making jigs. It gives you more versatilitywith your projects. With a little practice, you can't go wrong!

Have fun making Great Woodworking Jigs with safety in mind!

Woodworking Jigs-Why? How To Build?

Sunday, June 24, 2012

Woodworking Instructions-How to Build a Simple Straight Cut Jig

Woodworking Instructions-How to Build a Simple Straight Cut Jig


Improve your woodworking at home with these woodworking instructions on how to build this simple jig. The most common cut is a straight cut. The straight cut jig is the one we will be working with today, and with this jig every straight cut will be exactly where you intend for it to be.

Woodworking Instructions-How to Build a Simple Straight Cut Jig

Woodworking Instructions-How to Build a Simple Straight Cut Jig

Woodworking Instructions-How to Build a Simple Straight Cut Jig


Woodworking Instructions-How to Build a Simple Straight Cut Jig



Woodworking Instructions-How to Build a Simple Straight Cut Jig

This is a straight cut jig " or a" sawboard ". This jig is great!!! You can use this in place of your table saw for all your straight cuts, and it takes up a lot less room. To make this jig "all you need is a 1/4" piece of hardboard 2 foot by eight foot, if you can find it, or 4 x 8 if you can't, and a very straight 1x4x8.

Step one: Take time picking out your 1 x 4 because it serves as your straightedge on the jig. Glue the 1 x 4 to the hardboard, clamp and let dry.

Step two: After the glue has dried simply run the circular saw or router along the straight edge created by the 1 x 4, as it cuts the hardboard it creates an edge that you can see exactly where the saw will cut. You will now have an exact way to place all of your future cuts.

The hardboard is now where your saw cuts and you can measure and line up every cut perfectly. Just made your marks and line the hardboard edge along the marks with the side of your straight edge jig on the side you will keep. This way you don't lose the width of your blade from the cut piece, and clamp in place.

Woodworking Instructions-How to Build a Simple Straight Cut Jig

Wednesday, April 18, 2012

Chicago Electric Power Tools

Chicago Electric Power Tools


With a limited budget for tools in your workshop, Chicago Electric power tools are an option to explore. Chicago Electric power tools offer a variety of tools to select from. Their line of tools is economically priced to give you power for your Dollars. From their cordless drills to their largest floor model equipMent, Chicago Electric power tools give you value for your Dollar. They offer many tools you desire at bargain baseMent prices.

Chicago Electric Power Tools

Chicago Electric Power Tools

Chicago Electric Power Tools


Chicago Electric Power Tools



Chicago Electric Power Tools

Chicago Electric power tools offer a wide range of equipMent including corded and cordless equipment. They even have a few items for your workshop. Their band saw is popular with Airplane kit builders. The offerings from Chicago Electric power tools includes both corded and cordless drills, saws of all types, sandersand grinders. They offer both outdoor yard tools and household power tools. They even offer electric winches of various capabilities and an electric hoist. The variety that Chicago Electric power tools offer extends to some automotive related tools as well. A few bench based tools are offered also, like a compound miter saw.

Bands saws are used to cut thinner material into odd shapes with less wasTAGe from the width of the blade. The thin flexible blade allows material to be cut with a curved radius smaller than you can get from a circular saw. With a band saw, you rotate the material as you cut it to achieve the curves you desire. It is possible to make a tool called a jig that will help you to achieve a very smooth curves, reducing theamount of sanding needed to finish the piece.

The band on the band saw being thin and flexible has a tendency to break while you are cutting material. When this happens, shut the machine off and replace the blade. Usually the blade will break at the point it was welded together and will not shatter into pieces. When you purchase replacement blades, spend the money necessary to get the best you can find. The welds will be stronger and the blade will last you much longer than cheaper blades will. Be careful when pushing material into the blade. Do not wear any gloves or loose fitting long sleeves when operating a band saw. The blade has a tendency to catch such items and draw it into the flesh under the blade cutting quickly and deeply. Whenever operating anyequipment that Chicago power tools offers, wear protective eyewear to protect your eyes from flying materials.

Chicago Electric power tools offers quality power tools at bargain basement prices. They have the tools you desire at the prices you want to pay. When you are on a limited budget to fill your workshop with tools to accomplish those projects you absolutely have to get done, Chicago Electric power tools are definitely the best option available. You can find these tools online or at selected stores in your area.

Chicago Electric Power Tools

Tuesday, March 27, 2012

How Does Play Help Children's Development?

How Does Play Help Children's Development?


In this article I will introduce my personal definition of play, but acknowledge that play is basically indefinable because it is so vast and variable. I examine free flow play and the obstacles to play, and the purpose and value of play. I examine one small group of students working definition of play as a developMental tool that helps children develop holistically and other aspects of our definition, ie a developMental journey, play being accessible to all, and the aspect of fun and enjoyMent to play. Alongside this, this article examines structured and unstructured play, including theorists views and include some of my own observations and examine the content in them.

How Does Play Help Children's Development?

How Does Play Help Children's Development?

How Does Play Help Children's Development?


How Does Play Help Children's Development?



How Does Play Help Children's Development?

Before I extend on group's definition of play, I would like to state my own theory about play, andexplain what I mean stressing again, that play is basically indefinable because of its flexible and vast nature.

My theory is that play is fluid. It can take many forms, have many meanings, express itself in many ways, but it cannot be contained in a box or shape and labelled as ' play '. If play is taken out of context and into one another it changes its shape and purpose, and the way it moves and performs. All of it is play in its many facets, and all of it is of equal value, because it meets the differing needs of the child at the time it is being played.

Play is fluid so therefore cannot be defined purely as one aspect or another, and as water is fluid, so is play-it changes its shape to its environMent, circumstances and players taking on different forms, expressions andmeanings to the players concerned. It has intrinsic meaning to the children and may change direction at any moment, according to the children's needs and personality etc. Bruce specifies that play is like fluid and free-flowing,

She stated: "the whole point about play is that it cannot be pinned down. It flows. It is on the move. " (Bruce 2004: 154)

Free-flowing play can be limited by obstacles such as time, adults, relationships, routines, outcomes, interferences, circumstances, environment, or disability, and may not flow in the natural direction a child may wish to take it if limited by any of the above obstacles. However, because play is fluid, it can continue where it was left, or be restarted and flow in enTirely different direction if obstacles do not restrictplay.

Props may be used during free flow play which then takes on a symbolic characteristic, and children may engage in role play or socio-dramatic, rough and tumble, plus all rolled up into one, making it difficult to untangle and define! Children do not need adults to direct free-flow or fluid play, only to keep them safe from harming themselves or harming others. This may be viewed as an obstacle by children (and so it is) but as long as adults are not being ' over-protective ' or ' over-restrictive ' and children understand the need for safety rules (they tend to like rules in play anyway!) then the

obstacle or interruption is only a temporary obstacle, that children can overcome and move one, because their play is flexible and fluid.

The purpose or value of play, asmentioned is intrinsic to the child and players and appears to be part of children's developmental journey. Bruce (2004: 149) describes play as a process with no productive end. Play helps children develop in a holistic way, developing their social interactions, language skills, co-operation, understanding of how the world works, and personal, social and emotional development. Play is a tool that brings knowledge and experiences together. Vygotsky viewed play as a vehicle (or tool) for social interaction. Bruner believed roleplay was a vehicle (or tool) for learning about society's rules and conventions. Piaget believed play unifies children's experiences, knowledge and experience. Frobel, Steiner, and Issacs were the biggest advocates of holistic development. Frobel believed learning anddevelopment is holistic, involving the child, other adults and the environment, and that childhood is a sTAGe in it's own right. Steiner based his principles on Frobels and developed a programme involving

play. Issacs believed was central to play the overall development of the child.

Play is as an important of children's developmental journey-it becomes a tool by which children learn to develop in a holistic manner, it enables them to understand themselves, other people, their community and the world around them. Play also enables children to act out experiences, past and present, and enter into fantasy worlds. Bruner believed that play is process-led rather than task orientated, but also believed it prepares children for adulthood. (Fisher 1996: 97) We are all on a lifelongjourney and the journey, and the journey for me may be different to your journey. We may start at the same place, but go in different directions, and we may meet again but be different people, because life (and play, as part of that process) shapes the people and character we become. The journey of developing and learning is a long, slow, and ongoing process throughout life-a developmental journey which starts at birth and finishes at death, and play in its many fluid forms, becomes part of the process.

If play is structured, directed or initiated by adults, play takes on a different role. If play has a target or goal, outcome for a child to achieve, often children do not view this type of play as play, but as work .... they view

work as teacher-directed and play as choice,sitting down as working, and being active as playing (Wood & Attfield, 2005: 17). However, to divide between play and work cannot easily be made. Children learn through play, and whether it is teacher initiated or child initiated. Frobel, Steiner, Issacs, Piaget believed play should not be directed. Miss Boyce believed in a mixed approach, including free flow play and a more structured timetable for teacher-directed sessions. Montessori, demonstrated skills to children and did not believe in freeplay. Brunner saw play as a process but also believed adults need to scaffold children's experiences in order to help them progress to the next sTAGe, as did Vygotsky, who advocated adults working alongside children to build on/scaffold their understanding to move them onto the next stage.McMillian also believed in a structured environment that was planned to support children's needs, and which integrated subjects such as maths, science and literacy.

Whether play is adult-led, led or child children will learn many skills through play such as; co-operation, negotiation, other people's views, social skills, language skills, fine and gross motor skills may improve and other skills may

be mastered, thinking and cognitive skills are used and improved, so therefore children will learn through play whether there is an intended outcome or not! My own observations of children's play confirmed this. Children learned through many different types of structured and unstructured play. Structured play helped children develop more in the cognitive realm whereas unstructuredplay helped children develop more in the creative, language, physical and personal/social realm.

If they do meet the outcomes (which they should do if the resources, processes and intensions are aimed at the right level ...) then this is an added bonus! If planned and resourced correctly by practitioners, play can help children meet targets within the Foundation Stage, Key stage 1, or covering all aspects of the curriculum from Personal, social and emotional development through to creative development.

Adults can improve the quality of children's play by providing a rich variety of resources, well planned and structured play, indoors and out, needs sensitive scaffolding for children to learn new skills or progress and knowledge. Adults also need to provide plenty of free flowplay, and time

to complete tasks. If adults aim to intervene as little as possible in free play, this will provide a better outcome for children.

In structured play the teacher/adult has used play as a ' tool ' (others call it a vehicle or medium) but may not be viewed as play in its purest form. Play cannot be categorized into ' play ' or ' not play ' (because play is fluid and takes many forms) but may be better defined as ' pure play ' more or less ' pure play ' (Wood 2005: Attfield & 4-5) Wood and further define Attfield as well as unstructured play, active, fun, pretend, a process invented, child and child-chosen. Linden states, "Circumstances can prevent or restrict play. Constraints may be placed by adults or the environment limits children's experiences. Alternatively,developmental problems, disability or illness can shape the possibilities for children. " Play may be hampered (children may have obstacles to play) if they have any form of disability or cultural, language, social or economic differences. Children (like adults) tend to be exclusive, uncertain about things or people they don't understand or are not like them, unless they are informed/educated that all children have an equal right to play and should be granted access and opportunities to play.

Children need adults to be good role models demonstrating equality by provision and adaptability to children's needs. Children need adults to provide different types of play or different ways of playing, so that children can access it. Some children may need more adult support to access play,especially if there is some form of disability or complex needs. These children may access play differently, but all children have the same right to develop in a holistic way that all children do. All children need the ' tool ' of play for their own development; because play is fluid, the way the tool is used may be different.

I observed a young boy (of about 8 years old) and other children aged between 6-10 years in a social club setting. All the children, except the little boy of 8, were engaged in play locomotives. They were chasing, tickling, rolling, dancing etc throughout the night, mainly in small groups of children. The play looked chaotic but was not out of place in the setting. The adults observed this play and did not intervene. The children appeared

to have no purposeor intension but to enjoy themselves, and the value to them was in participating in the fun, making up games and dances, enjoying social activities together and passing time in an enjoyable way.

The other little boy of 8 however, did not join in any of the play, he merely acknowledged the other children. Instead of playing with the other children, this little boy stood in front of the band that was performing, and appeared to be conducting them (using a toy), virtually all night. He was'm ' engrossed in his play/work. Later on when the band had a break, he circled around the

hall floor (walking on his toes) making ' car-like ' movements. At this point the boy may have been involved in role play. However, his first play was very difficult to understand (possibly role play orpractice play?) This little boy appeared to have special needs along the line of Asperger's syndrome (noted from previous study and personal experience) I suspected Asperger's syndrome because he did not communicate with the other children, contact them, play alongside them, or join in their play. When they came near him once during play, visible locomotives he repelled/moved himself clearly out of their way. He couldn't or didn't access any type of social, co-operative or

parallel play, but preferred his own solitary activity and the type of play he engaged in was repetitive. Although his play didn't make sense to me, it was meaningful to him. He appeared to believe he was truly directing the band (though they ignored him and continued their performance), however he was'm ' engrossedin roleplay or practice play and appeared to enjoy what he was doing. His play was intrinsically valuable to him and he had as much right to play in this way as the other children had to play in their way. Linden Stated "Play stems from children's own perception of the world and how it works ... play is a very personal, creative activity ... within children's understanding, their play is meaningful in it no-play connection to reality. (2000: 43).

I also observed other types of play in other settings with younger children. The type of play observed included the socio-dramatic (2-3 year olds involved in playing with Dolls, prams and accessories, shopping etc); exploratory play (2-3 year olds exploring playdough and cutters, moulding, shaping, cutting etc); creative play-freepainting, mixing paints, making patterns and pictures and epistemic play (2-6 year olds involved in table top games,

including sounds, game & ladders and snakes alphabet jigsaw). The learning processes during these observations was vast, from social skills, co-operation and concentration to language skills, physical skills, fine motor skills, mathematic skills, creative skills to cognitive skills, being used, extended and enhanced in play to the benefit of the child/ren concerned.

Play, however, is not just a tool that enables development, play in itself is fun and has value in itself. Play is as valuable to the child as work is to adults. Fisher (96: 103) stated "Play has its own intrinsic rewards, it is done spontaneously and voluntary and it is thoroughlyenjoyable. " If play is self chosen, self-motivated and directed, then it can only be enjoyable. Theorists such as Lazarus and Garvey hold this view; indeed children would not so readily engage in play if it were not so! Linden (2001: 44) stated, "children play for play's sake. The activity is an end in itself and is not undertaken for an end product. "

Conclusion

In this article I have stated my theory of play as being fluid, and other aspects or definitions of play and its value in children's development. Included in this are some theorist's views of play, and observations of children's play and what they are gaining from it, noting however, that defining play in all its elements, is very difficult! Play has many facets and functions it is impossible for one or two statementsto adequately state what play is or does and many theorists hold differing views, reflecting this difficulty.

Play has become a tool in the Early Years sector and education and it is key to understanding how children think and feel. It has become clearer to me that play is crucial to children's social and emotional development, and other aspects such as language skills, cognitive skills and understanding the world in which they live. It has also become clearer to me that the least amount of time adults intervene in children's play, the better! (Though of course there is a time when structured play is appropriate). Play is enjoyable and motivating and a tool that develops children holistically and plays is fluid in that it fulfils many different roles that aids children in theirdevelopmental journey.

http://childsworld.info

How Does Play Help Children's Development?

Monday, March 5, 2012

You Can Make Money With Woodworking Projects

You Can Make Money With Woodworking Projects


If you enjoy doing woodworking projects, you can likely make some extra money. Despite the market being flooded with cheap Chinese goods, there is still a market for well crafted American hand made items. You might create something unique that people can only get from you. If you do manage to come up with an original and wonderful design, you can sell the plans. Once you get the plans made well, you can make as many copies as you can sell. Another thing to consider is opening your own weekend school. Parents wanting something constructive to do with their children can take them to you to learn how to make some simple wooden items. This could work well for you if you like kids and have patience.

You Can Make Money With Woodworking Projects

You Can Make Money With Woodworking Projects

You Can Make Money With Woodworking Projects


You Can Make Money With Woodworking Projects



You Can Make Money With Woodworking Projects

How you sell your woodworking projects would depend on what you decide to build.You may just make a bunch of small things with your jig saw that you can sell online. A lot of people will order nicely painted and crafted items to decorate their home. You can offer to custom make decorations for people.

If you want to make something big, like dog houses, that would likely be only for a local market because of shipping costs. You could also make play houses which children would love for their parents to buy. For painting, you can get creative or just paint it white and advertise it as something kids can decorate themselves. You can still advertise online using local market sites like Craig's List.

Coming up with a fantastic and original design for something other people can build is only one of the hard parts. To make really excellentplans that others can follow, you may need to draw detailed pictures. If you are not good at drawing, it can work to take photos of every step, but these will cost more to print. If you plan to sell this as a download then you can take all the color pictures you want, and it will not wear out your printer or use your ink.

You usually get more money and make more sales if you can include patterns with your directions. This will allow somebody to trace the pattern on the wood and just follow the lines with a jigsaw. That may not be necessary with every kind of plan, but if you are trying to tell somebody a unique way to make a rocking horse, they may need a horse pattern to trace.

You Can Make Money With Woodworking Projects

Cornhole Plans-How to Make Your Own Cornhole Set

Cornhole Plans-How to Make Your Own Cornhole Set


If you enjoy playing cornhole and are a do it yourself kind of person, here is a set of simple cornhole game plans for how to make a cornhole game set, along with the plans is a list of suggested tools. We hope that you enjoy creating your own cornhole set using our simple cornhole designs. After you review these plans, you will be showing others how to make cornhole boards in no time. These plans use standard cornhole diMensions.

Cornhole Plans-How to Make Your Own Cornhole Set

Cornhole Plans-How to Make Your Own Cornhole Set

Cornhole Plans-How to Make Your Own Cornhole Set


Cornhole Plans-How to Make Your Own Cornhole Set



Cornhole Plans-How to Make Your Own Cornhole Set

SUGGESTED TOOLS AND Supplies
1 1/2 "plywood sheet -4 ' x 8 '
3 2 "x 4" boards-8 ' long
1 box of deck screws

Tape Measure
Jig saw
Drill
Circular or mitre saw
150 grit sandpaper
Step by Step Instructions

Step One

Take the 4 x 8 sheet of plywood and cut it into four equal sections,all 2 x 4. Then take one section and cut it into 4 sections that are 11 1/2 "x 2 '.

Step Two

Take two of the 2x4x8 ' boards and cut then into 4 equal lengths. They should be 3 ' x 11 1/2 ". They are this size so that a riser can be added later on to tilt your finished board.

Step Three

Next take each of the 3 ' x 11 1/2 "boards and attach then with deck screws to each of the long sides of the platforms. Leave a 1/2 "gap at the end you want to be the top of the game board.

Step Four

Measure between the side rail boards for the exact measureMent for the top and bottom rails on each platform, then cut the remaining 2 x 4 to match those measurements. Then attach those cut pieces, on edge, with deck screws through the side pieces.

Step Five

Set the platformon the ground, right side up. You are about to find the cornhole position I know, go to the top of the board. That is the end that does not have a rail. Find the center of the cornhole by measuring 9 "from the top, then 12" from each of the sides. This will give you the dead center of the cornhole nuts. Now use a compass or a nail with a 3 "piece of string attached to it and a pencil to draw a complete circle. After drawing the circle drill a hole in the center that is large enough to insert the blade of your jigsaw. Begin cutting out the circle you drew. After cutting out the hole then use the sandpaper to smooth out the edges.

Step Six

Now take one of the 11 1/2 "x 2" boards and attach it above the cornhole. It will fit into that 1/2 "gap and be affixed with deck screws to theside boards.

You are now ready to play cornhole. If you want to paint the boards we recommend that you use a primer and then gloss enamel. If you use/outdoor house paint the paint Job should last as long as your boards.

If you want to make your own cornhole bags, please check out the article I have written and posted on this site. It is a detailed instructional on how to sew them yourself. It is a lot easier to buy your set and bags, but I hope the do-it-yourself people out there are able to use these instructions.

Cornhole Plans-How to Make Your Own Cornhole Set